Thursday, 19 April 2012

Recruitment Rules of PA / SA - Clarification


Click here to view Directorate clarificatiory orders on the above subject communicated vide letter no F 37 - 47 /2010-SPB - 1 (PF) dated 27.03.2012


151 Bihar primary teachers fail test, sacked


The Bihar government has sacked 151 primary school teachers after they failed to clear two consecutive eligibility tests, officials on Thursday said.

The education department has ordered that they be sacked after they failed two consecutive eligibility tests conducted in 2010 and 2011 by the State Council for Educational Research and Training. "These teachers have been sacked," said Asutosh, director, primary education, who had issued the order.
They were tested for knowledge of English, Mathematics, Hindi and General Knowledge for up to Class 5.
Education officials in various districts have been asked to comply with the order within 15 days.
According to officials in the education department, however, there is a provision for such action in regulations for recruitment of fixed pay teachers in state-run schools.
A few years ago, the state government had sacked 15,000 teachers for having submitted fake degrees and certificates for recruitment in state-run schools.
Bihar has been conducting such eligibility tests for school teachers since 2008.

surce:HT

Department of IT Renamed Department of Electronics and Information Technology


The Department of Information Technology, DIT (Ministry of Communications and Information Technology) has been renamed Department of Electronics and Information Technology, DeitY.

Recently, the Cabinet Secretariat amended the Government of India (Allocation of Business) Rules 1961 and renamed the Department of Information Technology as Department of Electronics and Information Technology (IN Hindi it is Electroniki aur Soochana Praudyogiki Vibhag).

In the early days, the Department of Information Technology was called Department of Electronics. In October 1999, it was initially made Ministry of Information Technology. But with the merger of Departments of Telecommunications and Posts in the Ministry, in December 2001, the Department acquired its current name of Department of Information Technology.

However, in recent years, there has been a feeling that the electronics sector has not been given adequate importance by the Government. This resulted in a demand from various quarters of industry, academia and other stakeholders that the Department should provide increased focus to the electronics sector. The renaming of the Department is a symbolic move in that direction.

The Department is in the process of initiating several measures to renew the thrust to the Electronics System Design and Manufacturing (ESDM) in the country. A new National Policy on Electronics is under finalization and a draft of the same was released by the Minister of Communications & IT last October. The Policy outlines the rationale and road map for the development of ESDM sector in the country. One of the declarations made in the draft National Policy on Electronics is that the Department would be renamed as Department of Electronics and Information Technology. Accordingly, a proposal for the renaming was taken up. This change is a result of that effort.

It is expected that this move will send a positive signal to domestic as well as foreign investors in the sector. Moreover, within Government and within the Department, it will help provide higher priority to policy initiatives relating to electronics.

The rechristening of the Department of Information Technology (DIT) as Department of Electronics and Information Technology (DeitY) would be ceremonially formalized at the hands of Sh Kapil Sibal , Minister of Communications and Information Technology) at an event on 19th April 2012 ( Thursday) at Electronics Niketan, New Delhi .

BK:AT:PM
(Release ID :82358)
Source : PIB dtd 18/04/2012

FAQs related to the New Pension Scheme (NPS)



FAQs related to the New Pension Scheme (NPS)
1.    Whether a retiring Government servant is entitled for leave encashment after retirement under the NPS?
      The benefit of encashment of leave salary is not a part of the retirement benefits admissible under Central Civil Services (Pension) Rules, 1972. It is payable in terms of CCS (Leave) Rules which will continue to be applicable to the government servants who join the government service on after 1-1-2004. Therefore, the benefit of encashment of leave salary payable to the governments/to their families on account of retirement/death will be admissible.
  

2.    Why is it mandatory to use 40% of pension wealth to purchase the annuity at the time of the exit (i.e. after the age of 60 years) from NPS?
      This provision has been made in the New Pension Scheme with an intention that the retired government servants should get regular monthly income during their retired life.

3.    Whether any minimum age or minimum service is required to quit from Tier-I?
      Exit from Tier-I can only take place when an individual leaves Government service.

4.    Whether Dearness Pay is counted as basic pay for recovery of 10% for Tier-I?
      As per the New Pension Scheme, the total Dearness Allowance is to be taken into account for working out the contributions to Tier-I. Subsequently, a part of the “Dearness Allowance” has been treated as Dearness Pay. Therefore, this should also be reckoned for the purpose of contributions.

5.    Whether contribution towards Tier-I from arrears of DA is to be deducted?
      Yes. Since the contribution is to be worked out at 10% of (Pay+ DP+DA), it needs to be revised whenever there is any change in these elements

6.    Who will calculate the interest PAO or CPAO?
      The PAO should calculate the interest.

7.    What happens if an employee gets transferred during the month? Which office will make deduction of Contribution?
      As in the case of other recoveries, the recovery of contributions towards New Pension Scheme for the full month (both individual and government) will be made by the office who will draw salary for the maximum period.

8.    Whether NPA payable to medical officers will count towards ‘Pay’ for the purpose of working out contributions to NPS?
      Yes. Ministry of Health & Family Welfare has clarified vide their O.M. no. A45012/11/97-CHS.V dated 7-4-98 that the Non-Practising Allowance shall count as ‘pay’ for all service benefits. Therefore, this will be taken into account for working out the contribution towards the New Pension Scheme.

9.    Whether a government servant who was already in service prior to 1.1.2004, if appointed in a different post under the Government of India, will be governed by the CCS (Pension) Rules or NPS?
      In cases where Government servants apply for posts in the same or other departments and on selection they are asked to render technical resignation, the past services are counted towards pension under CCS (Pension) Rules, 1972. Since the Government servant had originally joined government service prior to 1-1-2004, he should be covered under the CCS (Pension) Rules, 1972.
You may also like...
  • Finmin replies to Parliament Questions regarding New pension scheme
    Ministry of Finance New Pension Scheme New Pension Scheme (NPS) is a defined contribution scheme, its pay out depends upon the amount of contribution and the growth on the investment ...
  • Expert group calls for separating PF and pension accounts
    Expert group calls for separating PF and pension accounts An expert group has called for carving out two separate accounts -- PF and annuity --in the employee provident fund scheme ...
  • Special benefits in cases of death and disability in service – payment of disability pension/family pension – relaxation of qualifying service
    No. 33/5/2009-P&PW (F) Government of India Ministry of Personnel, PG & Pensions Department of Pension & Pensioner’s Welfare 3rd Floor, Lok Nayak Bhavan, Khan Market, New Delhi-110003 Dated the 10th ...
  • Things People should know about Employees Provident Fund
    Things People should know about Employees Provident Fund 1) Your PF entitles you to pension too Despite the popularity of the EPF as a saving tool, not many people are ...
  • New Pension Scheme: Choose plan to suit risk profile
    New Pension Scheme: Choose plan to suit risk profile Under the New Pension Scheme (NPS), investors save money which is put into the capital market. The sum which you will ...

    Courtesy : http://centralgovernmentemployeesnews.in

PAN CARD - WHAT IT EXPLAINS?




PAN is a 10 digit alpha numeric number, where the first 5 characters are letters, the next 4 numbers and the last one a letter again. These 10 characters can be divided in five parts as can be seen below. The meaning of each number has been explained further.

1. First three characters are alphabetic series running from AAA to ZZZ
2. Fourth character of PAN represents the status of the PAN holder.
* C — Company
* P — Person
* H — HUF(Hindu Undivided Family)
* F — Firm
* A — Association of Persons (AOP)
* T — AOP (Trust)
* B — Body of Individuals (BOI)
* L — Local Authority
* J — Artificial Juridical Person
* G — Government
3. Fifth character represents first character of the PAN holder’s last name/surname.
4. Next four characters are sequential number running from 0001 to 9999.
5. Last character in the PAN is an alphabetic check digit.
Nowadays, the DOI (Date of Issue) of PAN card is mentioned at the right (vertical) hand side of the photo on the PAN card.

Courtesy : http://seenurajandop.blogspot.in

RD Customer Package Version 3.0


RD Customer Package Version 3.0

This software is to be used by MPKBY / PRSS agents for generating files which can be imported into Sanchay Post.

Frequently Asked Questions
1.While installing RD Customer Package, an error 'Error 1334. The file 'GlobalControls_COMCT332OCX_f0.64768830_83DC_ 11D2_B95D_006097C4DE24' cannot be installed because the file cannot be found in cabinet file 'Data1.cab'. This could indicate a network error....' occurs.

Before installation of RD Customer Package, ensure that Microsoft Access or Access Runtime is installed in the system.
Access Runtime can be downloaded from:
http://www.microsoft.com/download/en/details.aspx?id=4438 or http://www.microsoft.com/download/en/details.aspx?id=10910
2.How to upgrade the new RD Customer Package if the old version distributed with SB Plug-In software is already in use?

Take a backup of 'rdprss.mdb' file and keep it safe. Install the new package Version 3.0. Copy the backup copy of 'rdprss.mdb' (old version) file to the application folder overwriting the newly created 'rdprss.mdb' file. After copying the 'rdprss.mdb' file, earlier data will be available for use in the new version also.


Email issues related to this software to sblansupport@hotmail.com
Source :

Software Development Centre
O/o the Chief Postmaster General
Tamilnadu Postal Circle
Chennai - 600002
Phone: 044-65850861