Tuesday, 20 December 2011

Meghdoot update 1-Problem in BOs in Postman Modules

When you upgrade Meghdoot 7.0 using update 1 and go for add/modify the branch office details in Post man supervisor as prescribed in the 'Read me' of update 1. You cant see any Central Server BOs for updating. This problem occurs at first all offices.The solution is
Central Server BO details are received at the office through RNet Communication. Please do 'Get Office Master' and 'Call Server' in RNet communication. Once files are received, update office master details through 'Despatch' module. Then central server BO details will be available in Postman supervisor. Once it is available, please modify local BO name with corresponding central server BO name.

Monday, 19 December 2011

DOPT ISSUES FREQUENTLY ASKED QUESTIONS AND ANSWER REGARDING SENIORITY OF CENTARL GOVERNMENT EMPLOYEES…

DOPT HAS ISSUED A NEW TABLE OF ‘FREQUENTLY ASKED QUESTIONS AND ANSWER’ TO CLARIFY COMMON AND TYPICAL QUESTIONS REGARDING SENIORITY OF CENTARL GOVERNMENT EMPLOYEES IN GOVERNMENT SERVICE…

Department of Personnel & Training

Establishment (D) SENIORITY

                       FREQUENTLY ASKED QUESTIONS AND ANSWER…

S.No.
Question
Answer
1
From which date the various provisions of consolidated instructions on seniority applicable?
Unless specifically, otherwise provided against each instruction, the said instructions are effective from the date of the relevant O.M. by which they were issued, prospectively
2
To whom the instructions on seniority issued vide DOP&T’s O.M.No.20011/1/2008- Estt.(D) dated 10.11.2010 are applicable?
The instructions on seniority issued vide DOP&T’s O.M.No.20011/1/2008-Estt.(D) dated 11.11.2010 are applicable in determination of seniority of the Government servants in Central Civil Services and Civil Posts except such Services and Posts for which separate principles have already been issued or may be issued by the Government.
3
Whether the instructions on seniority issued by DOP&T are applicable to PSUs/Autonomous Bodies/Banks etc.?
No. The seniority of the officers working in PSUs/autonomous bodies/ organisations /banks are governed by regulations/instructions issued by concerned Administrative Department/ PSUs/banks etc.
4
How the seniority of all direct recruits is determined?
The seniority of direct recruit is in the order of merit in which they are selected for appointment on the recommendations of UPSC or other selecting authority. The persons appointed as a result of earlier selection being senior to those appointed on subsequent selection.
O.M.No.20011/1/2008-Estt.(D) dated 11.11.2010.
5
Whether the seniority of direct recruits is determined by the date of confirmation?
No. The relative seniority of direct recruits that used to be determined earlier according to date of confirmation and not original order of merit (in cases where confirmation was in an order different from order of merit indicated at the time of their appointment) has been discontinued with effect from 4.11.1992.
O.M. No. 20011/5/90-Estt. (D) dated 04.11.1992.
6
How will the inter-se seniority be fixed if a direct recruit officer joins late ?
Seniority in such cases will be determined according to O.M. No. 9/23/71-Estt.(D) dated 06.06.1978 and O.M. No.35015/2/93-Estt.(D) Dated 09.08.1995.
7
How seniority of candidates of two different panels is determined, in case both the panels are received on the same date?
The seniority of candidates of two different panels received on the same date is determined by the following procedure:
(i) Chronology of recommendation letter;
(ii) Where the date of recommendation letter is same, chronology of Interview Board reports and
(iii) Where both (i) and (ii) are also same, then the chronology of requisition made by the respective Ministries/Departments.
O.M. No. 20011/1/2008-Estt.(D) dated 11.11.2010.
8
How seniority of candidates is determined in case two results of recruitment through examination are announced for selection to same grade or post within the same year
The seniority of the candidates will be determined as per date of publication/announcement of result. The candidate of the result announced earlier shall be senior to the candidate of the result announced later.
9
How the seniority of the promotee officer is determined?
The inter-se seniority of a officer promoted on the basis of the recommendation of a DPC either by selection or non-selection method as per due procedure, shall be determined as in the feeder grade from which they are promoted.
O.M. No. 20011/1/2008-Estt.(D) dated 11.11.2010.
10
How seniority of a promotee officer is determined in cases where more than one feeder grade is prescribed for promotion to the higher grade and specific quotas are given?
In such cases, the officer in each grade assess a fit by the Departmental Promotion Committee shall be interpolated in the ratio prescribed in each grade in the Recruitment Rules for the post, for the purpose of determination of seniority(principle of rota quota)
11
Is a SC/ST Government servant promoted by virtue of rule of reservation entitled to consequential seniority?
Yes. A SC/ST Government servant on promotion by virtue of rule of reservation roster will be entitled for consequential seniority.
O.M. No. 22011/1/2001-Estt.(D) 21.01.2002.
12
Can a General/OBC category Government servant promoted through a later DPC regain his seniority of the feeder grade on promotion to higher grade?
No. A General/OBC category officer promoted through a later DPC will be placed junior to the SC/ST category Government servant promoted through earlier DPC even though by virtue of rule of reservation.
O.M. No. 22011/1/2001-Estt.(D) 21.01.2002
13
What is co-relation between seniority in a grade and reservation roster for other grade?
OR
Whether a candidate is placed in the seniority list of a grade, as per his position in the reservation roster or vice-versa?
There is no co-relation between seniority in a grade and the reservation roster for the said grade. Seniority of an officer is determined as per order of merit given by UPSC or selecting authority or panel of promotion given by DPC. A reservation roster/points are meant only for identifying the vacancy that goes to a particular category of office
14
How the relative seniority of direct recruit and promotee is determined?
The relative seniority of direct recruit and promotee is determined according to rotation of vacancies between available direct recruits and promotees which is based on quota of vacancies reserved for direct recruitment and promotion respectively in the recruitment rules.
O.M. No. 35014/2/80-Estt.(D) dated 07.02.1986.
15
How year of availability in regard to determination of relative seniority of direct recruits and promotee is determined?
The year of availability, both in case of direct recruit as well as promotee, for the purpose of rotation and fixation of seniority is actual date of appointment after declaration of result/selection and completion of pre-recruitment formalities, as prescribed. The year of availability is a vacancy year in which a candidate of a particular batch of selected direct recruitment or an officer of a particular batch of promotee joins the post/service.
O.M. No. 22011/1/2006-Estt.(D) dated 03.03.2008.
16
Is a candidate appointed against the carry forward vacancy of earlier recruitment year, allow the seniority of the year in which the vacancy arose?
No. The seniority of direct recruits and promotees is delinked from the vacancy and year of vacancy.
O.M. No. 35014/2/80-Estt.(D) Dated 07.02.1986.
17
What is the starting point in the recruitment roster for the purpose of inter-se seniority of officers through direct recruitment, promotion, absorption etc.
The starting point in the recruitment roster for the purpose of inter-se seniority of officers through direct recruitment, promotion, absorption etc. will be as per provisions contained DOP&T’s O.M.No.28011/6/76- Estt.(D) dated 24th June, 1978.
18
How the seniority of an Officer absorbed after being on deputation or absorbed directly without being on deputation determined?
The seniority of an Officer absorbed after being on deputation or absorbed directly without being on deputation, If he has been holding already (on the date of absorption) the same or equivalent grade on regular basis in his parent department, is determined from the date he has been holding the post on deputation or the date from which he has been appointed on a regular basis to the same or equivalent grade in his parent department whichever is earlier. The fixation of seniority in aforesaid manner, however, will not effect any regular promotion to the next higher grade made prior to the date of such absorption.
O.M. No. 22011/1/2000-Estt.(D) Dated 27.03.2001.
19
How seniority of two or more surplus employees of a particular grade in an office determined in the event of their simultaneous selection for re-deployment in another office?
In this case, inter-se seniority in particular grade, on re-deployment in the latter office, would be the same as it was in the previous office.
O.M. No. 9/22/68-Estt. (D) Dated 06.02.1969.
20
How seniority of a reemployed officer determined?
For determination of seniority of re-employed officer is treated as direct recruit. Where Recruitment Rules of the post against which appointment is being made prescribed re-employment as a distinct mode of recruitment .then The inter-se seniority of persons so re-employed shall be determined in accordance with order of selection.
The relative seniority of persons so re-employed in relation to direct recruits and promotees shall be determined:
Where the Recruitment Rules prescribes specific quota for each of the categories (direct recruitment, promotion and reemployment) then seniority is determined on the basis of rotation of vacancies based on the said quota.
In other cases, on the basis of chronology of selection.
O.M. No. 20011/3/80-Estt(D) Dated 16.06.1980.
21
How the seniority of a meritorious sports person appointed in relaxation of Recruitment Rules determined?
Where sportsmen are recruited through the Employment Exchange or by direct advertisement and are considered along with other general category candidates, they may be assigned seniority in the order in which they are placed in the panel for selection. Where recruitment to a post is through a selection made by the Staff Selection Commission, whether by the competitive examination or otherwise, the sportsmen recruited in the department themselves should be placed en bloc junior to those who have already been recommended by the Staff Selection Commission. The inter se-seniority of sportsmen will be in the order of selection.
O.M.No.14015/1/76-Estt.(D) dated 4.8.1980.
22
How the seniority of a person appointed on compassionate grounds is determined?
A person appointed on compassionate ground in a particular year is placed at the bottom of all the candidates recruited/appointed through direct recruitment, promotion etc. in that year, irrespective of date of joining of candidate on compassionate appointment.
O.M. No. 20011/1/2008-Estt.(D) dated 11.11.2010.
23
How seniority of persons selected for appointment to different posts in the same grade requiring different qualification determined?
The seniority of persons selected for appointment to different posts in the same grade requiring different qualifications is determined as per provisions of para 4.9 of O.M. No. 20011/1/2008-Estt.(D) dated 11.11.2010.


Sunday, 18 December 2011

The Points to be remember related with changes in ruling in RD accounts

Main points related with SB order for deposit in RD accounts are furnished below

(1) In case of RD accounts opened between 1st Day and 15th Day of a calendar month, the each subsequent deposit in the account shall be made up to 15th day of the next month and in case of RD accounts opened between 16th day and last working day of the calendar month, the each subsequent deposit in the account shall be made up to the end of the next calendar month.

Procedure:-This change should be made applicable from 1.01.2012 to all old as well as new accounts. In the month of January 2012, as and when any depositor/MPKBY agent attends the post office for subsequent deposit, a rubber

stamp should be fixed on the cover and first page of the Passbook informing the last date up to which the depositor can deposit his monthly installment in the next month. Following is the sample of stamps:-

Sample-1

LAST DATE OF DEPOSIT IS

15th DAY OF NEXT MONTH

Sample-2

LAST DATE OF DEPOSIT IS LAST WORKING DAY OF NEXT MONTH

 Sample-1 is to be fixed on the passbooks of the accounts opened between 1st and 15th Day of a month and Sample-2 is to be fixed on the passbooks of the accounts opened between 16th day and the last day of a month. Till the software is amended, penalty should be charged as per old procedure i.e if the amount is not deposited up to the last working day of the month.

(2) In case maturity value of a discontinued RD account is retained after the date of maturity, the depositor shall be entitled to a simple interest at the rate applicable from time to time to post office savings account on the amount deposited from the date of maturity till date of payment.

Procedure:- At present, interest at the rate of 9.25% was being paid on such accounts. This amendment will be made applicable from 1.01.2012 to all old as well as new accounts. This calculation is to be made manually till the software is modified. Difference of interest calculated by the software and and interest calculated manually should be noted in the Register to be maintained in manuscript for future reference.

(3) In case of premature closure of RD accounts, simple interest at the rate applicable to post office savings account from time to time shall be payable.

Procedure:- Presently, interest is being calculated by the software by compounding the rate of savings account every year. This shall be applicable to the existing RD accounts also. This calculation shall be made manually from 1.01.2012 till the software is amended. Difference of interest calculated by the software and interest calculated manually should be noted in the Register to be maintained in manuscript for future reference.

(4) In case maturity value of RD Account is retained after 10 years, Post Maturity Interest shall be payable at simple rate of interest applicable from time to time to savings account from date of maturity to date of payment.

Procedure:- This is a new provision which does not exist in the software. This calculation shall be made manually from 1.01.2011 till the software is amended. This will be applicable for existing RD accounts also. Entry of such accounts in which PMI is paid should be made in a register to be maintained in manuscript for PMI for future reference.

(1) Maximum limit of 2 years fixed for admissibility of Post Maturity Interest has been removed.

Procedure:- Now PMI should be paid from the date of maturity to date of payment at the simple interest rate applicable to savings account from time to time. The rate of interest shall be equal to the rate applicable from the date of maturity to the date of payment at different times. For example, if an account was matured on 26.8.2010 and the depositor attends the post office on 15.12.2011, he will be paid PMI at the rate 3.5% from 26.8.2010 to 30.11.2011 and at the rate 4% from 1.12.2011 to 14.12.2011. This shall be applicable to the existing as well as new investments in all schemes. Calculations’ are to be made manually till software is amended and recorded in the Register to be maintained in manuscript for future reference. Following formula should be adopted while calculating the Post Maturity Interest for the number of days:-

 To calculate simple interest for number of days:- MV×R÷100×N÷365



MV= Maturity Value

R= Rate of interest

N=Number of days the account stands

Note:- While calculating number of days, the day on which account matures shall be counted in number of days but the day on which payment is being taken shall not be counted.

To  view the  order   and get  more details    please click  

                                SB Order 

The Feel in the Cockpit of an A 380

As you move your cursor you can see the entire cockpit - a true 360 degree experience.
You can even zoom in or out on the dash.

CLICK HERE >>>>>>>>
INSIDE THE COCKPIT OF THE AIRBUS A380
The Airbus A380 is the largest passenger airliner in the world. It can seat more than 850 people. Only a few of the planes are in service. So, you'll probably have to wait for your first ride. Until then, check out its state-of-the- art controls

HONEYWELL MS5145 BAR CODE SCANNER CALIBRATION



Most of the Single handed post offices supplied with Honeywell eclipse 5145 PS/2 bar code scanner.But the keyboard supplied with the machine is USB type. Normally the scanner does not work in the current configuration. We can calibrate the scanner very easily by scanning about 4 default bar codes in the correct order. The bar codes are given below

Usage of Attrib Command


Attrib allows a user to change the properties of a specified file. Using Attrib, the user has the capability of changing the file to have any of the below attributes. This command is available in DOS 3.0 and above and Windows 95 and above. We need to apply(+) or (-) option to apply or remove the effect.
  • Read-only (R): Allowing the file to be only viewed and not written to.
  • Archived (A): Allowing Microsoft backup and other backup programs to know what files to backup.
  • Hidden (H): Making the file invisible to standard users.
  • System (S): Making the file an important system file.
Syntax: attrib [+/-] [r/a/h/s] [filename]

Examples
  • To Set the Read Only permission to Autoexec.bat present in CDrive, we need to run the Command: "attrib +r c:\autoexec.bat"
  • To Remove the Read Only permission from Autoexec.bat, we need to run the Command: "attrib -r c:\autoexec.bat"
  • To Set the Hidden permission to Autoexec.bat, we need to run the command: "attrib +h c:\autoexec.bat"
  • To Remove the Hidden permission from Autoexec.bat, we need to run the Command: "attrib -h c:\autoexec.bat"
When you create any file or directory, Archive Attribute set by default. If you want to see the Attribute for each file, just run "attrib" Command and it will show you the present attribute. If you want to see the file with Read Only attribute, run "dir /ar" Command. Similarly for Hidden Attribute run "dir /ah" and for System Attribute run "dir /as".

In ideal DOS, it is not possible to delete any file having Read Only or Hidden attributes, but if you are working with Windows Shell, you can delete the file having these attributes.