Wednesday 22 January 2014

CHANGE HP PRINTER SETTINGS FOR SIFY NETWORK MIGRATION

HP LaserJet  P2055x Printers - Manual IP Setting 

here the instruction was given for how to configure the IP address manually using the control panel.
NOTE: Specific automatic IP modes (such as BOOTP, DHCP, or AutoIP) can be changed by using the embedded Web server or HP ToolboxFX only. If AutoIP is disabled, HP default IP (192.0.0.192) will automatically be enabled.
  1. On the control panel, press OK .
  2. Use the arrow buttons to select Network config. , and then press OK .
  3. Use the arrow buttons to select CFG TCP/IP , and then press OK .
  4. Use the arrow buttons to select BOOTP , make sure the value is No , and then press OK .
  5. Use the arrow buttons to select DHCP , make sure the value is No , and then press OK .
  6. Use the arrow buttons to select IP BYTE 1 , and then press OK .
  7. Use the arrow buttons to change the value of IP BYTE 1 , and then press OK .
  8.  Repeat steps 6 and 7 for IP BYTE 2 , IP BYTE 3 , and IP BYTE 4 . Also, repeat steps 6 and 7 for the Subnet Mask (SM BYTE 1, SM BYTE 2, SM BYTE 3, SM BYTE 4 ) and Default Gateway (GW BYTE 1, GW BYTE 2, GW BYTE 3, GW BYTE 4 ).

 NOTE:

 Example: If the IP address is 192.168.0.1
        IP byte 1=192
        byte 2=168
        byte 3 =0
        byte 4 =1
   9.  Use the Back or Cancel button to leave the Network config. menu.
 10.  Settings will take effect after Step 9 and the printer has returned to Ready .

Print A Network Report Page As Follows:

    Press OK
    Press the down arrow to select Reports , and then press OK.
    Press the down arrow to select the Network Report , and then press OK .

To make these settings permenant, press and hold the Cancel and down arrow keys simultaneously until "Permanent Storage init " displays on the control panel.

Source : http://potools.blogspot.in/

SANCHAY POST V7.5 BY SDC CHENNAI dtd 21/01/2014

SANCHAY POST VERSION 7.5 : Download

FEATURES

Added Features in Sanchay Post version 7.5:
  1. Provision for updating Aaadhar ID for all schemes
  2. NSC IX Online & Data entry module
  3. FTO Processing
Enhancement of existing requirements:
  1. Data Entry Module for certificates such as KVP, NSC VIII and NSC IX issue
  2. Modifications in SCS accounts extension

Potman 7.9 Day end issues for SO/HO having no BOs...

Issues: 

        After update MM 7 Update 9 while day end Postman Module it shows an error message Invalid Object name 'subtreasury..branchoffices'.

Solution:

Download and Execute Postman branch office Creation exl using Script Tool.exe
This Solution only applicable for If no BOs were attached with SO/HO.

Download

Download

Note: Never try this Solution if BOs attached with your SO/HO.