Source : http://ccis.nic.in/WriteReadData/CircularPortal/D2/D02adm/36028-1-2014-Estt-Res.pdf
Wednesday, 28 October 2015
Seventh Pay Commission Likely To Allow Work From Home For Disabled, Women Employees
New Delhi: Seventh pay commission is likely to ask the government to consider allowing disabled and women central government employees to work from home.
The commission may recommend government to ask Information and Technology department, whether it is possible to have systems in place for monitoring and supervising work being done remotely by disabled and women central government employees .
“Allowing disabled and women central government employees a choice in where and how they work can increase employee loyalty and job satisfaction, and the government needs to apply it for a big win to boost their confidence, which will also give the productivity,” said a pay panel official.
The studies revealed those disabled and women employees who have the option of working outside of the office also reported somewhat lower levels of stress and exhaustion. And studies have suggested that employees tend to get higher performance evaluations.
Allowing employees to work away from a government office means increased opportunities for those women and those persons with disabilities. It can also help the environment, as the employees are able to eliminate lengthy commutes.
The work from home filtered into jobs that have little to no stress and minimal travel.
At present, the strength of disabled employees in the total workforce of the central government is 9,339, which constitutes 0.3 per cent of the total staff strength of 29.59 lakh, according to an RTI reply to The Indian Express from the Department of Personnel and Training (DoPT).
Women employment under central government has been estimated to the tune of 3.37 lakh, which is 10.93 percent of the total regular central government employment, according to census of central government employees as on March 31, 2011.
“We are looking at whether it is technologically possible to allow disabled and women employees for working from home,” said the official.
“A need was felt to provide work from home facility to persons with disabilities and women to enable them to effectively discharge their duties.,” he added.
The government constitutes the Pay Commission almost every 10 years to revise the pay scale of its employees and often states also implement the panel’s recommendations after some modifications.
Headed by Justice Ashok Kumar Mathur, the four-member Commission was appointed in February 2014 and the commission will hand over its recommendations to government within December 31, 2015.
As part of the exercise, the current Pay Commission holds discussions with various stakeholders, including organisations, federations, groups representing civil employees as well as defence services.
The Sixth Pay Commission was implemented with effect from January 1, 2006, the fifth from January 1, 1996 and the fourth from January 1, 1986. The Seventh Pay Commission will be implemented with effect from January 1, 2016.
source : http://www.tkbsen.in/
Discontinuation of interview for Junior Level Posts in the Government
Discontinuation of interview for Junior Level Posts in the Government
Immediate
F. No.39020/09/2015-Estt(B)
Government of India
Ministry of Personnel, Public Grievances and Pensions
(Department of Personnel & Training)
New Delhi, the 27th October, 2015
To
The Chief Secretaries of all the State Governments/Administrators of the Union Territories.
(As per list attached).
Subject: One day workshop scheduled for 29.10.2015 at Civil Services Officers Institute (CSOI), New Delhi, to be conducted for the Principal Secretaries of GAD of States/UTs, in connection with discontinuation of interview for Junior Level Posts in the Government
Madam/Sir,
In continuation of this Department’s letters of even number dated 20.10.2015 and 23.10.2015 on the above subject, it is informed that due to unavoidable administrative reasons the One day workshop scheduled to be conducted on 29.10.2015 at Civil Services Officers Institute (CSOI), New Delhi, for the Principal Secretaries of GAD of States/UTs, in connection with discontinuation of interview for Junior Level Posts in the Government, has been postponed to 16.11.2015.
2. It is also informed that the venue for the Workshop i.e. CSOI, New Delhi, will remain same.
3. You are therefore requested to kindly depute the concerned officer to participate the Workshop. As requested earlier, the details of the Officer being deputed may be sent to this Department, on the following e-mail:
Jssv1-dopt@nic.in
4. Inconvenience caused is regretted.
Yours faithfully,
(Dr.Devesh Chaturvedi)
Joint Secretary to the Govt. of India
Authority: www.persmin.gov.in
DOWNLOAD ADMIT CARD / CALL LETTER FOR PA / SA EXAM 2015
Admit Card For SSC CHSL 2015
(Note: Before viewing the Call Letter, kindly make sure that A4 size paper is selected and both Top and Bottom margins of the print area will have only 5 mm)
Facility for downloading Admission Certificate (AC) from this website has been given only for candidates admitted for 1st & 15th November, 2015 . Facility for downloading AC for the candidates admitted for 20th December, 2015 will be given 10 days before the exam.
POSTMAN 7.9.3 MODIFIED DATED 18.10.2015
MM 7.9.3 Postman Module Modified Dated 18.10.2015
Postman Module has been revised and uploaded on 18.10.2015 on CEPT FTP. The latest version of Postman may be used for the upcoming and updated offices for proper functioning.
Download the latest version from CEPT
Download Postman Revised 1.60MB from PoTools
SUB ACCOUNT 7.9.3 INCORRECT SYNTAX NEAR 'TEL'
Incorrect Syntax Near 'Tel' In Sub Account
After Upgrade MM 7.9.3, While taking printout of General Reports in Sub Accounts in may shown the error message as
Run-time error '-2147217900 (80040e14)':[Microsoft][ODBE SQL Server Driver][SQL Server]Line 1: Incorrect syntax near 'tel'.
Solution
- Download attach script which is given by CEPT for the above mentioned problem.
- The same may be executed with the help of System Administrator.
SUB ACCOUNT TABLE CREATION ERROR AND SOLUTION in 7.9.3
Sub Account 7.9.3 Invalid Object Name Error
After upgrade MM 7.9, while doing data entry in BO / SO Account in Sub Account it may shown the below error
The above error message due to improper updation of fields data in Subtreasury database. This may be recover two ways.
- Restore Old database then do the up gradation properly.
Do Re Day begin in Sub Account
In the Supervisor menu there is an option > Undo Day's work. This will delete the tables created while making Day Begin. Then correct the server date to current date. Login to Sub Accounts. Make the Day Begin for current date.
Note : the above solution is also applicable for by mistake the day Begin is being done to a future date.
INVOICE SPEED POST ARTICLE ERROR IN SPEED NET 4.3
Speed 4.3 Invoice Error And Solution
Error Message :
Could not find stored procedure ARN_ValidateHCPODBarcodePrefix
Solution
- Download and Execute the script file ARN_ValidateHCPODBarcodePrefix.exl using ScriptTool.exe
- First Take full backup of POSPCC database then execute the above script.
SPEED NET 4.3 UPGRADATION PROBLEM - OLD VERSION DETECTED
Speed Net database upgrade issues
Attempt to login with old version of Speed Net detected. Please upgrade to the latest Version of Speed Net 4.3 Release dated 15.07.2015 and then try login
Solution For Speed Net 4.3 Update Problem
- Solution for the referred issue is available at CEPT FTP site.
- The office concerned need to do the following: Go to
ftp://cept.gov.in/SpeedNet/Speednet4.3/Utilities/
- and click on directory "Speednet 4.3 Version Script Solution".
- Now, download POSPCC_V43_09102015.exl file and run the script.
POINTS TO REMEMBER WHILE UPGRADE SPEED NET 4.3
Speed Net 4.3 Up Gradation Issues And Solution
After Upgrade to Speed Net, the following error may come due to the improper configuration. Check the following point after upgrade the Speed Net 4.3 to transmit /receive the files without any issues.
Issues Noticed
Communication module not working / Files not transmitting/ receiving after upgrade.
Solution
Once Speed Net 4.3 is updated check the followings,
Step 1:
- Supervisor --> Master --> Environment --> Folder Paths --> please check whether Meghdoot Point of Sale Information is provided correctly or not.
If not correct then correct it (i.e., tick the option Meghdoot - Point of Sale is installed and under use in this office, click on the option Point of Sale and SpeedNet are connected through Network and enter the correct SQL Server Name where Point of Sale Databases are installed)
Step2
- Open the hosts file (c:\windows\system32\drivers\etc)
- Add the below entry
103.244.127.226 speednetmsg.ptcmysore.gov.in
SPEED NET 4.3 BNPL DISTANCE SLAP CONFIGURATION AND SOLUTION
After updating SpeedNet to version 4.3 it shows error in BNPL speed post booking. While trying to do data entry of BNPL article it shows an error
"The office with the pincode......is not found in the office master list. Please update the office master database first and retry".
The required cities are added with appropriate distance slab freshly after updating the software.
All the added pincodes are properly mapped with distance. Mapping is done from 'Supervisor --> bulk customers --> Configuration --> cities'. I have also checked 'Supervisor --> bulk customers --> Configuration --> Map Pincode - Distance Slab' window and there is no unmapped offices shown in the list. The error message tales that
'Please update the office master database first and retry'.
Is there any way to upload the office master data to database from the 'office master' text file available in the SpeedNet folder.
Yes.
Procedure To Upload Office Master
Please do the following for updating the latest offices master data:
- Download the latest office master file from the Speednet MIS.
- Update the offices data using the option in Speednet communication-->Update Offices.
- Update the offices data under
Supervisor-->Master-->Offices-->Add Additional Offices-->Update option.
- Enter the pincode and click on fetch button. In case details for the required offices are available, then the office master updation is done properly. Else, do the office master updation once again.
- If pincode details are available, update the pincode - distance slab mapping under
'Supervisor --> bulk customers --> Configuration --> Map Pincode - Distance Slab' window.
Subscribe to:
Posts (Atom)
