WISH YOU ALL A VERY HAPPY NEW YEAR 2012

Read More

Relesed of Revised MNOP Script ( dtd 28/12/2011)

It is decided to keep both POS and SpeedNet MNOP Updation Script at a single point download. This script has to be used at all the offices using POS and SpeedNet.

Based on the latest Sorting Extract / Orders received from the Directorate and IC Hub Data received from Circles, the Revised MNOP Script is released and the details of the releases are as follows.

This script will contain the entire Hub Master data as per the requirement /modifications - including all the previous revisions. This document shows only the latest revisions. 

Steps to Update:

·         Take Full Backup of POSPCC DB

·         Execute the EXL file through ScriptTool.exe.

·         Login to Speednet and check View-> Hub Details option .

Note:

SpeedNet: Script is compulsorily to be updated in concerened Hub or IC Hub as well as in all offices using SpeedNet whose Pin Code is covered under  Pin Range Modification /  Hub – Addition/Deletion.

At other SpeedNet offices the script may be executed so that the Hub Details option in the SpeedNet Module, will show the latest MNOP Pin Range for all hubs.

POS: All offices Booking Speed Post Articles have to update the script. 

Source & Download

Read More

MSDTC ERROR DURING SUBMIT OF ACCOUNT IN POS IN SQL2008

First login to the system with Administration previleges and do the following

To allow the network transaction, you must enable MSDTC. To do this, follow these steps:

a. Click Start, and then click Run.

b. In the Run dialog box, type dcomcnfg.exe, and then click OK.

c. In the Component Services window, expand Component Services, expand Computers, and then expand My Computer.

d. Right-click My Computer, and then click Properties.

e. In the My Computer Properties dialog box, click Security Configuration on the MSDTC tab.

f. In the Security Configuration dialog box, click to select the Network DTC Access check box.

g. To allow the distributed transaction to run on this computer from a remote computer, click to select the Allow Inbound check box.

h. To allow the distributed transaction to run on a remote computer from this computer, click to select the Allow Outbound check box.

i. Under the Transaction Manager Communication group, click to select the No Authentication Required option.

j. In the Security Configuration dialog box, click OK.

k. In the My Computer Properties dialog box, click OK.

Note:

After following the above steps configure the servernames in treasury and Point of Sale.

If the problem is not solved configure the servernames using ip address of sql server..

Read More

SANCHAY POST DCL QUERY

1. Run Query Analyzer
    Select POST database and Exceute the following command

    Select sid from sysusers where name = 'DCL'

    Eg. The result like this 0xB7165F12378..........
   
Copy this value

2. Execute these commands one by one
   
    sp_configure 'allow updates', 1    Highlight the query Press Ctrl E
   
    reconfigure with override     Press Ctrl E

3.    Select Master databse and excute the following statements:

    Update sysxlogins set sid = <Paste previous copied value  eg. 0xB7165F12378.........>
    where name = 'DCL'

4. Execute these commands one by one
   
    sp_configure 'allow updates', 0    Highlight the query Press Ctrl E
   
    reconfigure with override     Press Ctrl E

Read More

All In One Tool For System Checkup, System Cleanup, System Speedup, Network Security And PC Performance

Toolwiz Care is a free tool kit designed to speed up your slow PC. With multi-functional optimization suite, this Windows system optimizer provides a collection of tools which includes System Checkup,System Cleanup,System Speedup,and 40+ powerful tools to enhance your PC performance, local and network security, and optimize the start-up procedure. Toolwiz team guarantees users that Toolwiz Care will stay free forever. This tool kit is designed for all levels of PC users from beginners to experts.

Latest Version: 1.0.0.230
Operating System:Windows XP/2003/Vista/Server 2008/7

Category:Diagnostic Software

File Size: 3.9 M

• The Disk Cleaner tool will clean out all junk files.
• The Registry Cleaner tool will make the PC system more stable by cleaning out the bad Registry entries.
• The Registry Defrager rebuilds PC’s Registry, making the entire system run quicker and smoother.
• The History Cleaner protects the user’s privacy by deleting all activity history and surfing traces.
• The Fast Defrger will de-fragment the hard drive with it’s smart engine, keep the PC running efficiently and prevent the formation of other fragmented files.
• The Checkup module provides a full report of user’s PC system and allows the user to fix all problems with one simple click.
• The Boot Report provides a easy to read report that shows the start-up time of user’s system. It offers a detailed list of the processes loaded since booting.
• The Startup Optimizer allows the user to disable or delay the loading of any startup entries. It also provides the users with suggestions of standard processes.
• The Game Booster concentrates every system resource for gaming purpose. It temporarily shuts background processes and other unnecessary Windows services. The Game Booster also cleans out the RAM and intensifies processor performance.
• The Password Generator creates highly secure passwords with upper and lower case letters, numbers and punctuation symbols.
• The File Undelete data recovery software ensures recovery of data permanently deleted from the Recycle Bin or with the help of SHIFT + DELETE key.

Source & Download

Read More

RList Software for Divisional Offices.

RList - Tool for bulk booking of RLs and generation of text file for uploading to Despatch 7.2 module as well as distribution of RLs received to the various branches in DO.

Click below button to download complete setup (11.5 MB).

Click below button to download portable RList(102 KB).

For comments, feedback, problems if any pl contact: srputtur@gmail.com, 09449012470

Read More

Add Admin Rights, Disable or Reset Password For A Windows Account

      












                                                                                              Now a days everyone likes to keep password on their system but sometimes when you forget your password then there in no way to retrieve it. Some times while using your computer or laptop you would have observed that in spite of being the only user of your system you are not the administrator of the system as a result you are not able to authorize some operations. Are you tired of resetting the passwords and remembering them after a specified duration because you are forced to do it. Then I have got a solution to all your problems an application named PC Login Now.

The application has a 100% recovery rate for the passwords. The software can be used to reset the Windows Logon Passwords. This application will also help you to change a level of an account to administrative level. The software can also be used to disable and lock accounts. You can also set your passwords to never expire so that you don’t have to take the pain of choosing a new password  and remembering the passwords after a stipulated period of time. The application is available for Windows2003, Windows 2008, Windows XP and Windows Vista. The application can be used to reset Windows security settings ,Windows Password and other accounts passwords. The software will also allow you to change the Windows local administrator. The software will also allow you to change the accounts policy properties and settings. Tasks like resetting your normal account to administrative level will not require a reboot of your system thus saving your precious time.

The application also supports Syskey. Syskey was an optional feature of Windows NT 4.0 SP3. This feature was used to protect against offline attacks of password cracking. The application runs on Linux Live CD also. The software supports all the file systems like NTFS, FAT16, FAT32.

This is the first window which will open when you will run the software for the first time after downloading and installing it. The tool is made in a very simple manner so that everyone can use it.

When you will press the Next button you will get the option to select the operating system which is installed on your system. You can select the OS that you want in case you have multiple Operating Systems installed on your systems.

Then in this window you will have to select the User on which you want to perform the operations. The various operations that you can perform are password never expire, is lockout and is disabled.

After all the operations are performed you can click OK so that the it will reboot.

Download PC Login Now

Read More

DOS / Windows IP Commands

Below, you'll find a list of the most common IP commands for Windows and DOS. These include ipconfig, trace route, netstat, arp, route, hostname, control netconnections, and other popular DOS and Windows IP commands.

C:\> 

Display Connection Configuration: ipconfig /all

Display DNS Cache Info: ipconfig /displaydns

Clear DNS Cache: ipconfig /flushdns

Release All IP Address Connections: ipconfig /release

Renew All IP Address Connections: ipconfig /renew

Re-Register the DNS connections: ipconfig /registerdns

Change/Modify DHCP Class ID: ipconfig /setclassid

Network Connections: control netconnections

Network Setup Wizard: netsetup.cpl

Test Connectivity: ping whatismyip.com

Trace Route: tracert

Displays the TCP/IP protocol sessions: netstat

Display Local Route: route

Display Resolved MAC Addresses: arp

Display Name of Computer Currently on: hostname

Display DHCP Class Information: ipconfig /showclassid

NameServer Lookup: nslookup whatismyip.com

Read More

Shortcut Keys in Windows XP

Shortcut keyboard key in windows xp     CTRL+C - (Copy)

CTRL+X (Cut)

CTRL+V (Paste)

CTRL+Z (Undo)

DELETE (Delete by sending to recycle bin)

SHIFT+DELETE (Delete permanently without sending the files or folders to the Recycle Bin)

Press CTRL and drag an item with mouse to create a copy.

Press CTRL+shift and drag an item with mouse to create a shortcut.

F2 key (Rename)

CTRL+SHIFT with arrow keys (Highlight a block of text)

SHIFT with the arrow keys (Select more than one files or folders in a window or on the desktop, or       select text in a document)

CTRL+A (Select all)

F3 (Search )

ALT+ENTER (View the properties of the selected file or folder)

ALT+F4 (Close the active file or folder)

ALT+SPACEBAR (Open the shortcut menu for the active window)

ALT+TAB (Switch between the open items)     ALT+ESC (Cycle through files or folders in the order that they had been opened in      the task bar)

F4 (Shows the Address bar list in My Computer or Windows Explorer)

SHIFT+F10 (Display the 'right click tab' of selected item)

CTRL+ESC (Display the Start menu)

Windows key(Display the Start menu)

F10 (Activate the menu bar in the active program)

RIGHT ARROW (Open the next menu to the right, or open a submenu)

LEFT ARROW (Open the next menu to the left, or close a submenu)

F5 (Update the active window)

BACKSPACE (View the folder back in my computer or windows explorer)

ESC (Cancel )

SHIFT when you insert a CD-ROM into the CD-ROM drive (Prevent auto play)

CTRL+SHIFT+ESC (Open Task Manager)

CTRL+ALT+DELETE(Open Task Manager)

Change your computer window  into a black screen Steps 1.       Hold Shift, Alt and Print Screen keys together in key board 2    Click on OK when a message appears (this enables high contrast on Windows system). Now your screen should change to black. 3     To revert back screen to previous state press Shift, Alt and Print Screen again. ------------------------------------------------------------- Collected by  S Jayachandran

Read More

अगर आप मेडिकल स्टोर से दवा खरीद रहे हैं और आपको लगता है कि वह दवा नकली है? तो अब आप इसको कंफर्म कर सकते हैं।

अगर आप मेडिकल स्टोर से दवा खरीद रहे हैं और आपको लगता है कि वह दवा नकली है? तो अब आप इसको कंफर्म कर सकते हैं। इसके लिए आपको बस 99010-99010 पर दवाई पर अंकित कोड नंबर के साथ एक एसएमएस करना होगा और सिर्फ पांच मिनट में ही पता चल जाएगा कि दवा असली है या नकली।कंपनी, अल्फा न्यूमेरिक बार कोड के आधार पर दवा के नकली और असली होने की पुष्टि एसएमएस के जरिए करेगी।दवा असली होने पर उसका बैच नंबर और दवा कंपनी का नाम उपभोक्ता को एसएमएस से मिलेगा। इसका मिलान उपभोक्ता, दवा कंपनी की स्ट्रिप पर छपे बैच नंबर से कर सकेगा। यह यूनिक कोड सिंगल यूज होगा, ताकि कोई भी नकली दवा निर्माता कंपनी असली दवा की स्ट्रिप पर छपे कोड की कॉपी नहीं कर सके।

Read More

How to quickly Repair your Mobile Phone dropped in water?

Many of you get your mobile phone wet by one way or another. You worry as you mistakenly drop your mobile phone in water. It can also get wet if you are out in a heavy rain. However, there is no need to panic. It is possible to save your wet mobile phone by quickly repairing it. In order to save your mobile phone from water damage, you can consider these easy and simple solutions:

Act rapidly : 

The first thing you have to do in order to save your wet mobile phone is to act rapidly. Quickly remove all the detachable parts as well as covers possible such as the back cover, battery, the SIM card, memory card etc. Next, take a piece of cloth or a tissue paper to wipe the excess water you are able to notice within the mobile phone. Make sure that you dry it completely. If you don' t do this, the water inside the mobile phone will begin to evaporate and gather in places which will be difficult to reach.

This will save your wet mobile phone and it will start working if it was under water for just a little while.

Using a Hairdryer : 

Take a hairdryer and begin drying the mobile phone while giving more consideration to the place where the battery is located. The battery housing usually consists of tiny holes to let in air (so giving more space for water) inside the mobile phone.

Make sure that you are not holding the hairdryer very near to the mobile phone. Keeping it too close to the mobile phone may harm the electrical mechanism of the mobile phone. Keep on drying the mobile phone from a safe distance for about twenty to thirty minutes. 

If solution number 1 and solution number 2 don't work, try solution number 3. 

Drying for a long time: 
Take off the covers as well as battery from the mobile phone. Put the phone in a dry as well as warm place to let the water inside the phone evaporate gradually from the little holes in the mobile phone.

Read More

Year End Review Deptt. of Information Technology

Year End Review of Achievements and Initiatives of Department of Information Technology

Draft National Policies on Electronics-2011 and Information Technology-2011 Released

Steps taken to Make India Hub for Electronic Hardware Manufacturing

Four New Mission mode Projects (MMPs) Added under NeGP

Electronic Delivery of Services Bill Introduced in Parliament

   

Draft National Policy on Electronics – 2011

The Draft National Policy on Electronics, 2011 (NPE 2011) was released on 3.10.2011. The draft Policy envisions creating a globally competitive Electronics Systems and Design Manufacturing (ESDM) industry including nano-electronics to meet the country's needs and serve the international market. One of the important objectives of the Policy is to achieve a turnover of about USD 400 Billion by 2020 involving investment of about USD 100 Billion and employment to around 28 million by 2020. This includes achieving a turnover of USD 55 Billion of chip design and embedded software industry and USD 80 Billion of exports in the sector. Another important objective of the Policy is to significantly upscale high-end human resource creation to 2500 PhDs annually by 2020. The Policy also proposes setting up of over 200 Electronic Manufacturing clusters in the country.

Draft National Policy on Information Technology, 2011

Draft National Policy on Information Technology, 2011 (NPIT 2011) wasreleased on 7.10.2011. The Policy aims to maximally leverage the power of Information and Communication Technology (ICT) to help address economic and developmental challenges of the country. The focus of the IT policy is on deployment of ICT in all sectors of the economy and on providing IT solutions to the world. The Policy focuses on application of technology-enabled approaches to overcome developmental challenges in education, health, skill development, financial inclusion, employment generation, governance etc., to greatly enhance efficiency across the board in the economy. The Policy seeks to achieve the twin goals of bringing the full power of ICT within the reach of the whole of  India  and harnessing the capability and human resources of the whole of  India  to enable  India  to emerge as the Global Hub and Destination for IT-ITeS Services by 2020. It is rooted in the conviction that ICT has the power to transform  India  and improve the lives of all Indians.

E-Governance

Mission Mode Projects (MMP)- 4 New MMPs (Education, Health, PDS and Posts) have been added under NeGP taking the total number of MMPs under NeGP to Thirty One (31). Posts has been added as a  Central MMP  while the remaining three (3) MMPs (Education, Health and PDS) have been added as State MMPs.

A major initiative of the Government for ushering in e-Governance on national scale, called National e-Governance Plan (NeGP) was approved on 16^thMay 2006. NeGP consists of Mission Mode Projects (MMPs) and program support components which aim at creating the right governance and institutional mechanisms, core infrastructure, policies & standards and the necessary legal framework for adoption of e-Governance in the country. It is implemented at the Central, State and Local Government levels. Significant achievements in this area are as under:

Electronic Delivery of Services (EDS) Bill provisioning mandatory delivery of all public services in e-mode in next five years has been approved by the Union Cabinet on 20.12.2011 and introduced in Lok Sabha on 27.12.2011.

Common Service Centres - As on 30^th November, 2011, a total of 97,439 Common Service Centres (CSCs) have been rolled out in thirty three States and UTs. 100% CSCs have been rolled out in 13 States. A proposal to set up additional 1.5 lakh Bharat Nirman Common Service Centres so as to have one CSC in each Panchayat in whole of rural  India  has been prepared.

State Wide Area Networks - The State Wide Area Networks (SWANs) are already operational in 29 States.

State Data Centres - The State Data Centres have been made operational in 16 States.

e-District - e-District Pilot project has gone live in 12 States. Scheme for National Rollout of e-District MMP has been approved. Guidelines for National Rollout of e-District MMP has been finalized. 

Capacity  Building (CB) - Under the CB Scheme, State e-Mission Teams (SeMTs) have been setup in 32 States and UTs. Over 1000 Government officials have been trained under Specialized Training for e-Governance Programme (STeP). The first Chief Information Officer (CIO) training for officers of Central and State & UT officials has started on 7th November, 2011.

Standards – To ensure sharing of information and seamless interoperability of data and e-Governance applications, Policy on Open Standards, Biometric standards, Metadata and Data Standards, Localization and Language Technology standards, Network and Information Security, Digital Signature, Quality Assurance, Website Design Guidelines have been notified by DIT.

Mobile Governance - A Draft Policy on Mobile Governance has been formulated.

Awareness and Communication - 11 Workshops have been held across the country. The 14^th National Conference was held in  February 2011.

Citizen Engagement and Social Media Framework - For wider and deeper participation and engagement with all stakeholders especially public at large, a Citizen Engagement Framework for e-Governance Projects has been developed.

Electronics Hardware Manufacturing (EHM)

The Government has attached high priority to electronics hardware manufacturing. It is keen to develop an ecosystem, which will make  India  a global destination for electronics system design and manufacturing. The significant achievements during the course of the year are as follows:

Setting up of Semiconductor Wafer Fabs: An Empowered Committee (EC) for identifying technology and investors for setting up Semiconductor Wafer Fabrication (Fab) Manufacturing facilities in the country was constituted.  The EC after interacting with the potential investors will crystallize the nature and quantum of Government support in physical/financial terms and recommend to the Government the course of action to attract investments in the sector.

Roadmap for promoting growth of semiconductor design and services industry: India Semiconductor Association (ISA) has carried out a “Study on semiconductor design, embedded software and services industry” with the support of Department of Information Technology (DIT). The report covers Very Large Scale Integration (VLSI) design, Embedded software design and Hardware/board design. A roadmap has been prepared to enable semiconductor design and services industry to move up the value chain and maintain growth rate of revenue of over 17% p.a.

Roadmap for promoting growth of electronic components industry:Electronic Industries Association of India (ELCINA) has carried out a Study entitled “ELCOMOS - Electronic Components, Hardware Market and Manufacturing Output Study including related Assemblies and Value Chain in India” with DIT’s support. A roadmap has been prepared for promoting growth of electronic components industry.

Communications and  Brand   Building  Campaign for promotion of ESDM sector in  India : The Campaign has been launched with the objective to build “Made in  India ” as leading global brand in ESDM and increasing awareness regarding initiatives taken by Government to promote investments in ESDM sector.

Mandatory compliance of safety standards for electronic items: A draft Order in respect of safety standards for 16 selected electronic items has been prepared and consultations are underway with the Department of Consumer Affairs and Bureau of Indian Standards to notify mandatory compliance. 

National Informatics Centre (NIC)

National Informatics Centre (NIC) is the premier S&T organization under the aegis of the Department of Information Technology, Ministry of Communications and IT. It is the principal e-Governance solution provider. During last one year, it has implemented several e-Governance applications and services in addition to strengthening the computing and data communication infrastructure in the country. Notable achievements of the year are:

Augmentation of NICNET: During last one year, NIC has established three National Data Centres in the country to support large e-Governance applications.  NIC is also facilitating the hosting of more than 7000 websites/portals of various Government Departments.

e-Procurement: GePNIC is developed as a generic e-Procurement System by which manual tendering activity is carried out in a secure environment. GePNIC has been implemented in 13 State and UTs 35,146 tenders worth over Rs 45,218.10 Crores, have been processed successfully during current financial year till 30th Nov 2011. Department of Commerce has decided adoption of NIC’s e-Procurement System in Government departments of 23 states as a part of MMP on e-Procurement.

e-Court: It is a project of great importance aimed at creating ICT infrastructure for various levels of judiciary from Supreme Courts to sub-district courts, resulting in improved level of disposal of cases at various levels. The ICT infrastructure has been set up in more than 450 court complexes during the current financial year.

e-Counseling for admissions to professional courses: e-Counseling System of NIC has helped crores of students in the admission process for various professional and technical courses of more than 20 State Boards of Technical Education resulting in considerable saving of time and money on the part of admission aspirants as well as the State boards.

e-Office: e-Office enables working in the Government leading to greater transparency and efficiency. This application has been implemented in more than dozen Central Government departments and some of the State Govt. Secretariat ushering into an electronic age of management of Government files.

MGNREGASoft: This application is a centrally hosted service being used by the Department of Rural Development, Government of India and various State Governments in the management of the whole work flow of the implementation of the Mahatma Gandhi National Rural Employment Guarantee Act right from registration to finalization of wages of workers of one of the largest social sector schemes in the world.

National Knowledge Network (NKN)

The Government’s decision to set up National Knowledge Network was announced in the Budget Speech of Union Budget for 2008-09. In March 2010 the Government approved the establishment of the National Knowledge Network (NKN) over a period of 10 years. The objective of the National Knowledge Network is to interconnect institutions of higher learning with a high speed data communication network. Network will consist of an ultra-high speed Core (multiples of 10Gbps and upwards), and over 1500 nodes. It is scalable to higher speed and more nodes also. The Core shall be complemented with a distribution layer at appropriate speeds. The participating institutions can directly or through distribution layer connect to the NKN at speeds of 100 Mbps /1 Gbps. The application areas envisaged under the NKN cover: Agriculture, Education, Health, e-governance, Grid Computing (High Performance Computing). As on 30^th November, 2011, a total of 450 Institutions are connected to NKN, and 43 virtual classrooms have been setup.

Nanotechnology

                Department of Information Technology (DIT) started Nanotechnology Development Programme during the 10^th Plan with the objective to create infrastructure for research in nanoelectronics and nanometrology at the national level and also to fund small and medium level research projects in specific areas such as nanomaterials, nanodevices, Carbon Nano Tubes (CNT), nanosystems etc. Two major nanoelectronics centres  have been set up in the country. These centres have become Centres of Excellence in Nanoelectronics (CEN) and are being recognized nationally and internationally and attracting young talent. The facilities of these centres are being made available to all other users in the country as well as abroad through Indian Nanoelectronics Users Programme (INUP) funded by DIT. More than 110 R&D projects from more than 100 external organizations across the country have been taken up so far under INUP. About 1150 manpower from more than 350 organizations across  India  have been trained through INUP.

Read More