|
Problem
|
Solution
|
|
Installation
|
|
While installing error-
“Insert Disk”
|
There is an old speednet CAB file
present in OS installation folder.
Please search for sp*.cab file in
C:\Windows or C:\Winnt folder. If found delete them.
Then install the package afresh
|
|
While installing system is asked to
be restarted every time.
|
Check whether Service Pack SP 4 for
Windows 2000 or SP3 for XP systems are installed.
|
|
While installing – error MSDART.dll
file
|
If the following error occurs
during the Client installation –
“The Procedure entry point couldn’t
be located in the dynamic link library MSDART.DLL.”
When the error occurs – Click on OK.
Then next it will show a file
registration error – Click on Ignore.
Then again the MSDART.DLL error
occurs . Click on OK
Then next it will show another file
registration error – Click on
Ignore
Now it will install.
Now package gets installed. This
error will not cause any problem in the package.
Note: If any Version Conflict messages
appears, then keep the existing files in the system and continue the
installation.
|
|
At the end of the installation
error – “Path not Found”
|
Click on Retry button to continue.
If this doesn’t solve the problem, reinstall the client component.
|
|
Active X Component Error –
Found at any stage during
installation.
|
Check whether Service Pack SP 4 for
Windows 2000 or SP3 for XP systems are installed. Also install MDAC 2.7
If using Speednet 3.1 then download
the 3.1.1 version from site.
|
|
Installation problem in Vista
System for the first time
|
Right click on the setup.exe file
and select option.
This will install the package without any problem.
Also register all the dll files
which are in the SpeedNet Client Installation folder.
To register the dll:
· Right
click on Dll file and select Open with
· Select
Browse option and go to Windows\System 32 folder. Select Regsvr32 file
· Select
open and ok button in the subsequent forms.
· This
will show the successful registration message.
· If
this process is not registering the Dll then :- please uninstall the SpeedNet
client and ensure that old installation files doesn’t exist in the system.
Then go to start->Run and type msconfig. A System Tools window opens.
Click on Tools option. Search for option
from the list. Select it and click on Launch. Restart the system then install
the SpeedNet client and then register the Dlls. At the end don’t forget to go
to msconfig ->Tools and select and
launch and restart system.
Note: Enable User Account Control
is a must as it is a new security component in Windows Vista.
|
|
|
|
|
Configuration – Database Creation
|
|
While creating the database,
message appears as – “Unable to load the configuration file”
|
Uninstall the SpeedNet Client
component from Control Panel –Add Remove Programs and reinstall it.
|
|
While creating the database, “Speed
Net found an illegal tampering of information... Quitting”
|
Uninstall the SpeedNet Client
component from Control Panel –Add Remove Programs and reinstall it.
|
|
While creating database error –
“SQL Server error. Please close all
applications”
|
This is the error related to Hard
disk. Check the following.
· Drive
letter provided is wrong
· POSPCC
and POSPCCBackup files exist in hard disk
· No
space in the hard disk.
|
|
While creating the database error –
“Specified SQL Server not found”
|
The Server name provided is wrong.
Please also check whether you have installed SQL as Instance. If so, edit the
SQL Server name with SQL Instance name.
|
|
While creating the database error
“Login failed for user SA”
|
The SQL Password typed is wrong.
|
|
In vista – shared file is not being
accessed at the end of client installation.
|
In cases where new systems are
supplied to project arrow offices, some problems in accessing server
component folder even after sharing this folder may occur due to architecture
of new OS installed in these systems.
IN such case system administrator
should overwrite defaults permissions given to SpeedNet server folder :
To do this they can follow the
procedure below:
If it is vista operating system do the following steps before
configuring the permissions:
1. Go to Start->Run and type
msconfig
2. Under Tools, select Disable UAC
and click on Launch button given below.
3. Restart the system.
4. Applying the permission changes
to SpeedNet server folder as given below.
Permissions:
7) Right click SpeedNet Server
folder, select Properties ->Security tab and click on button therein.
2) Select the user if already
present in the list there or Click on Edit and then button. Type everyone and
click on OK.
3) In the next screen, check on
permission for Allow.
4) Click on advanced
5) Uncheck the check box .
A new option screen appears wherein click on remove button
6) Now click on OK button and Ok
button in the previous screen.
7) Share the SpeedNet server folder
and assign full permission to user
on shared folder.
Give similar permissions to user as
above.
|
|
|
|
|
Configuration – Other Issues
|
|
While configuring, the required SPC
name is not found for selection. Then how to install?
|
The procedure is explained in the
SpeedNet Hand Book supplied along with 3.1 version release and the copy of
the same is available in Speednet 3.1 CD. (Refer 2.8)
|
|
Error Inserting Offices to
OfficeMaster –Could not bulk insert. File ‘SPCMaster.txt’ does not exist
|
This problem is solved in Speednet
3.1.1.
You are using older version. Please
download the 3.1.1 version and upgrade.
|
|
While configuring at linked office,
Linked office name not found for selection. How to install?
|
The procedure is explained in the
SpeedNet Hand Book supplied along with 3.1 version release and the copy of
the same is available in Speednet 3.1 CD. (Refer 2.9)
|
|
“Automation Error” at the time of
configuration
|
Solution 1:
Dll Registry problem. Please open
the Speednet client folder path (C:\Program Files\Speednet default folder) .
Register all the dll files using the regsvr32 file.
Procedure to register:
1. Right click on The dll file
2. Click on – Open with option
3. Browse – C:\Windows\System32
4. Select the file regsvr32.dll
5. Click on Ok to register.
If it is Vista System and there is
problem in registration of Dll files, please see the solution given at the
heading –
as to how to register the dll files in vista.
|
|
While configuring Error -
"Text property read only"
|
This is the problem with old cab
file remaining in the system during fresh installation of SpeedNet 3.1.1
Uninstall Speednet client from Add
Remove programs
Search for C:\Program
Files\Speednet folder ( Its default path of client folder) . If exists delete
it.
Now go to search option ( or Find)
of windows and search for spcl*.cab file in C:\Windows folder. If any such
file exists delete it.
Then install the Speednet Client
3.1.1 afresh.
|
|
Login
|
|
While starting the package itself,
there is error
“Error in Opening the Connection
70. Permission denied”
|
This problem would have occurred in
Vista
systems.
As a solution, right click on the
SpeedNet exe and click on Run As Administrator option and click on Allow to
run the package.
|
|
While logging in it says the user
is already logged in other system.
|
This problem is solved in Speednet
3.1.1.
You are using older version. Please
download the 3.1.1 version and upgrade.
|
|
Error while logging in –
“Not a valid Password”
|
This is mdb file access error
through the client system.
Check the sharing permissions of
the SpednetServer folder at server system. Whether the XP client user has
been given full permission to access the folder.
If by giving permission if the
problem is not solved, then reinstall the SpeedNet Server component and share
it afresh with full permission to
(BNPL Module – old bill data will
be lost with the re installation of SpeedNet Server)
|
|
Error while login –
“BNPL Database is not found in the
specified path”
|
This problem is solved in Speednet
3.1.1.
You are using older version. Please
download the 3.1.1 version and upgrade.
|
|
Login is very slow and takes too
much time.
|
Login as Supervisor – Use
Tools->Delete Old data option. Use Truncate option to truncate the log
files of POSPCC and POSPCCBackup. (Please ensure that no one uses SpeedNet at
that time, else DB will be corrupt)
|
|
While Logging in Vista Systems,
when selected user, given password and click on OK, package simply exists
without any message or error
|
Right Click on the Speednet.exe
which is in the SpeedNet client path (default client path is C:\Program
Files\SpeedNet) and click on.
If this is not working then please
share the SpeedNet Server folder in the Server System with Special Permission
as given in the instruction at the heading
|
|
Shift Begin /Shift End
|
|
|
While making Shift End error – it
gives
BNPL Error /
Pending Message error
|
This problem is solved in Speednet
3.1.1.
You are using older version. Please
download the 3.1.1 version and upgrade.
|
|
While making the Shift Begin – it
shows the error that system date and time is incorrect.
|
Please check whether the System
date is Current Date.
From SpeedNet 3.1 onwards , package
will not allow to make the Shift Begin for a date for which already Shift
Begin and Shift End are done.
|
|
While making shift End – it shows a
big list of non dispatched bags.
|
This is not an error.
Please read the SpeedNet User
Manual or for details on Non Dispatched Bag List.
|
|
While making the Shift End –
Package exists automatically
|
Please read the SpeedNet User
Manual for details on Shift End for Non Dispatched Bag List. If the list
contains huge number of pending bags due to incomplete work in the package,
then this happens.
Reinstallation is the solution.
source: sapost.blogspot.com
Courtesy : satish24k.blogspot.in
|
2 comments:
Thank you for any other magnificent post. Where else may anyone get that kind of info in such a perfect manner of writing? I have a presentation next week, and I'm at the look for such info.
5.67ct Genuine Emerald Bracelet in 14Kt White Gold
I've been browsing online greater than 3 hours today, yet I by no means found any interesting article like yours. It's pretty value enough for me. Personally, if all website owners and bloggers made excellent content material as you probably did, the web will likely be a lot more useful than ever before.
Kamik Women's Jennifer Rain Boot
Post a Comment