PASSBOOK PRINTER SETTING FOR DOP FINACLE

Passbook Printer Setting For DOP Finacle

Steps for Configuring the Passbook Printer

• Step 1: Goto Control Panel -> Devices and Printers path.
• Step 2: Select Generic IBM Graphics 9pin wide as the Default Printer.

 

• Step 3: Please select the Printer Server Properties tab on the top as shown in above screenshot. Below screenshot will pop-up.

• Step 4: In Forms tab, please click on Create a new form and in Form name, please type the Name as PassbookNew1.

Please specify the measurements for margins as shown in the below screenshot and click on Save Form and Click on OK button.

• Step 5: In Devices and Printers path, right click on Generic IBM Graphics 9pin wide and select Printing Prefernces. Below specified screenshot will pop-up with Layout and Paper/Quality tabs.

• Step 6: In Layout tab, please click on Advanced button as shown in the below screenshot.

• Step 7: On Click of Advanced button, below specified screenshot will pop-up. Please select the Paper Size as PassbookNew1 and Print Quality as 240*216 dots per inch. Same setting as shown in below screenshot should be done.

• Step 8: In Devices and Printers path, right click on Generic IBM Graphics 9pin wide and select Printer Properties. Below specified screenshot will pop-up with General, Sharing, Devices Setting tabs etc.

• Step 9: Please click on the Devices Settings tab. Below specified screenshot will pop-up.

• Step 10: Please select the Tractor Feed as PassbookNew1 and Manual Paper feed as PassbookNew1 and click on OK button.

• Step 11: After doing the above changes, in General tab, automatically, in the Paper available section, the PassbookNew1 will be displayed as shown in the below screenshot.

• Step 12: In IE browser, please select the Print -> Page set up as shown in the below screenshot.

• Step 13: On click of Page Setup, below specified screenshot will appear. Please modify the settings as shown in the below screenshot.  Please ensure the Page Size is selected as 

PassbookNew1 and Enable Shrink to Fit option is unchecked.

Also, the Headers and Footers section, all the fields needs to be selected as Empty.

• Step 14: After doing the above changes, a sample passbook may be printed for the first page and the next page for confirmation and verification.

• Note :- LPT Parellel Cable should be used to connect Printer with CPU.